Pic 1 shows the basic wiring I did from the switches to the back of the project box lids.
I used 22 ga. wire running 1 ground from each bank of switches.
Pic 2 shows the wiring of the left box to the controller. I hooked all up to the #1 side. If I expand and ad more I will use the #2 side.
Pic 3 shows the final set-up of my button box. All switches have been labeled with the most common keys I will be using. Note: There are 4 plugs marked "INOP" for future use. I cut a hole in the right hand side for the USB cable. Easily able to unplug and move.
No comments:
Post a Comment